Abstracto

Optimization of Power Consumption for CNC Turning Of AISI 1040 Steel Using Taguchi Approach

Aditya Kulkarni, Hemant Mandave, Vajay Sabnis

This study investigated the parameter optimization of CNC turning operation for AISI 1040 steel based on Taguchi approach. AISI 1040 steel has wide application in manufacturing sector. Cutting speed (m/min), feed (mm/rev), depth of cut (mm), nose radius (mm) and cutting fluid concentration (%) are optimized for power consumption as performance characteristic. L27 Orthogonal Array was used and analysis of variance (ANOVA) is also applied to identify most significant factor. Optimal parametric combination 200m/min-0.15mm/rev-0.5mm-0.4-9%was obtained and validated. It has been observe that cutting speed has most significant factor followed by depth of cut and cutting fluid concentration on Power consumption. Power consumption decreases with decrease in cutting speed (350 to 200 m/min) and depth of cut (1.3 to 0.5mm) while increase in cutting fluid concentration (3 to 9%).