Abstracto

Design of 2/3 prescalerLow Power Flexible Multiband Divider

R.Naveenkumar, V.A.Saravanan

The demand for lower cost, lower power, and multiband RF circuits increased in conjunction with need of higher level of integration. In this project a low-power single-phase clock multiband flexible divider for Bluetooth, Zigbee, and Network standard’s 802.15.4 and 802.11 a/b/g Wireless LAN frequency synthesizers is proposed based on pulseswallow topology and is implemented. The frequency synthesizer, usually implemented by a phase-locked loop (PLL), is one of the power-hungry blocks in the RF front-end and the first-stage frequency divider consumes a large portion of power in a frequency synthesizer. The proposed prescaler based approach reduces the area and power significantly. The multiband divider consists of a proposed wideband multi modulus 32/33/47/48 prescaler and an improved bit-cell for swallow (S) counter and can divide the frequencies in the three bands of 2.41–2.483 GHz, 5.14–5.30 GHz, and 5.715–5.815 GHz with a resolution selectable from 1 to 25 MHz The proposed multiband flexible divider is silicon verified and consumes power of 0.96 and 2.2 mw in 2.3-and 5-GHz bands, respectively, when operated at 1.8-V power supply. The proposed prescaler is achieved by without using any additional flip flops. It gives a solution to the low power PLL synthesizers for wide range of communication applications.